Dog trace d-mute small Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Dog trace d-mute small. Dog trace d-mute small 19. Electronic anti bark collar
Anche per Dog trace d-mute small: Manuale d'uso (13 pagine)

Stampa la pagina

* * * Operation test is a mode, which is used to verify proper operation of sound and

stimulation impulse. Connect each wire of the test discharge lamp to the one contact point

(loosen the contact points, put the wires under the lamp outlets and tighten again). When

selecting the mode, no. 6 (operation test) you should hear the acoustic signal + electro-

nic impulse comes ON (test lamp lights up), then the software switches itself to a mode 1

(acoustic beep tone). If you don´t hear a long acoustic signal or if it does not light up send

to the service.

Setting reaction to vibration (vibration detection sensitivity) with a trimmer

The reaction to the vibration means that the device is activated by vibrations of the dogs

vocal cords. If your device only reacts to a significant or contrariwise on bland vibration of

vocal cords, which are scanned by the contact points, you can adjust the sensitivity of the

collar so it starts working only at the right moment. This (sensitivity) setting is important

for the proper function of the device.

Sensitivity setting

d–mute small

d–mute

Trimmer for fine adjustment setting