Cygolite Metro 360 Manuale operativo - Pagina 2

Sfoglia online o scarica il pdf Manuale operativo per Accessori per biciclette Cygolite Metro 360. Cygolite Metro 360 2.

Stampa la pagina

HEADLIGHT OPERATION

The Metro features 6 light modes controlled by the power button. During

use, the power button will illuminate to show the power is on. The diagram

and instructions below indicate where the light features are located on the

headlight.

CAUTION: The light may get hot during use. Handle with care and turn

light off if stationary for more than 10 minutes.

USB port

Side Illumination ports

OPERATION

1. Press power button to operate the light. The light will turn on and the

power button will illuminate.

2. Press power button to scroll through the different settings.

3. Hold the power button for 2 second to turn the light off.

4. Walking mode: (when the light is OFF, hold the power button for 2

second to turn the light ON in the Walking mode.

LIGHT MODE MEMORY

For convenience, the Metro memorizes the last mode used before it is

turned off. When it is turned back on, it will turn on in that mode.

LIGHT MODES

Med > High > Low > Steadypulse

> DayLightning

24/7 Safety Technology

are modes made specifically for night and

day use for added visibility whenever you ride.

SteadyPulse

mode alerts motorists with triple pulses while constantly

lighting your path at night. It is made especially for riding at night in high

traffic areas.

DayLightning

mode boosts flash brightness to lightning-like flashes

that are brighter than the high mode to demand motorist's attention in

peak daylight.

CAUTION: For daytime use only.

SIDE ILLUMINATION PORTS

During use, the side ports will illuminate to provide added side visibility to

adjacent motorists and traffic.

LOW BATTERY

If the light dims dramatically during use, the battery is near empty. At this time

we recommend stop using the light and recharge it immediately.

MOUNTING ON HANDLEBARS

The Locktite

handlebar bracket has a tool-free design to let you mount

the bracket on the handlebar with ease while firmly staying in place

through all riding conditions.

1. Attach handlebar spacers to inside of handlebar bracket for standard

Power Button

sized handlebars. Remove spacers for oversized handlebars.

(During use)

2. Attach rubber pad to handlebar spacer (or handlebar bracket) for grip.

Solid = Light On

Attach Handlebar spacers

(for standard sized bars)

Rubber pad

3. Wrap bracket around handlebar, return thumbnut in slotted space, twist

thumbnut clockwise to tighten.

4. Slide headlight back into the bracket until headlight clicks into place.

5. To remove headlight, press the release tab on the bracket and slide the

headunit forward.

ADJUST THE SIDE-TO-SIDE BEAM DIRECTION

Swivel the headlight left to right to adjust the side-

to-side direction. If side swivel becomes loose,

tighten the swivel screw on the top of the bracket

> Walking

with a philips screwdriver.

ADJUSTING THE VERTICAL BEAM DIRECTION

Twist bracket thumbnut counterclockwise to loosen

bracket. Rotate bracket around handlbar for

preferred vertical beam angle then tighten

thumbnut.

OPTIONAL MOUNTING

An optional helmet mount kit (Part No. HLMT-DCV6) is available for this

light. To order, call Cygolite customer service or order online at:

shop.cygolite.com

Release Tab

Thumbnut

BATTERY CHARGING

WARNING: Fully charge the battery before first time use. We

recommend to charge the battery with the supplied USB cable. If using

another USB cable or charger, check the power button to verify the light

is taking a proper charge. The button will iluminate to show its charging

status. The charger is for indoor use only.

Rubber Cover

Charging Port

1. Pull the top of the rubber cover to reveal the charging port.

(Do not remove rubber cover from light)

2. Connect the USB charging cable to a USB power source.

3. Insert charging cable into the USB charging port on back of light.

4. The power button on top of the light will flash green when charging

then have a steady green when fully charged.

5. Allow approximately 5 continuous hours to fully charge.

6. Disconnect the cables when charging is complete and cover charging

port with rubber cover.

OPTIONAL WALL CHARGING

If you prefer to charge directly through a wall outlet, an optional wall

charger (Part No. ND-0501000U) is available. To order, call Cygolite

customer service or order online at: shop.cygolite.com

RUN TIMES

Light Modes (hr:min)

Model

High

SteadyPulse

Med

Low

METRO 500

1:30

2:15

METRO 360

1:45

2:30

Power Button

(During charging)

Flash

= Charging

Solid

= Full

DayLightning

Walking