Dogtra 2300NCP Advance Series Manuale delle impostazioni - Pagina 3
Sfoglia online o scarica il pdf Manuale delle impostazioni per Prodotto per la cura degli animali domestici Dogtra 2300NCP Advance Series. Dogtra 2300NCP Advance Series 4. Remote controlled dog training collars
Anche per Dogtra 2300NCP Advance Series: Manuale delle impostazioni (6 pagine), Manuale del prodotto (14 pagine)
Stampa la pagina
Code setting for your newly replaced
2300NCP Advance Receiver (One-Dog)
Once you have received the collar/receiver that was sent to
you by the Dogtra facility, you need to code set your unit to
control the new Receiver with your Transmitter.
The code setting method is the same as the procedure
described on Code setting for your newly replaced 2300NCP
Advance Transmitter(One-Dog)
Code setting for your newly replaced
2302NCP Advance Transmitter (Two-Dog)
Once you have received the transmitter that was sent to you
by the Dogtra facility, you need to code set your unit to control
your Black Collar/Receiver and Orange Collar/Receiver with
the new Transmitter.
The method of the code setting is as follows:
Code setting for your Black Collar/Receiver:
1) Turn the Transmitter on by
pushing the ON/OFF Switch
located on the right side then
select the level 0 with the
Intensity Selection Dial.
2
2) Set the Nick/Constant Toggle
3) Place the red dot on the back of
4) Within 5 seconds after releasing
Together
light blinks once every 4 seconds after staying on green for
about a second. Now the setting work is completed.
Switch on the front of the
transmitter on the N position.
the transmitter to the red dot on
the Black collar/receiver. Hold
the two red dots together for
about 5 seconds or more.
Release them when the green
LED blinks fast on the
collar/receiver.
the transmitter and the receiver,
hold the Black button and the
Orange button on the left side of
the transmitter together for 3
seconds, or until the rapid green
blink resumes to a slower paced
green blink. The LED indicator
3