3M 8810 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Prodotto respiratorio 3M 8810. 3M 8810 2.
Anche per 3M 8810: Istruzioni per l'uso (3 pagine), Manuale (2 pagine)

Stampa la pagina

8810 Respirator

Data Sheet

Main Features

The 3M 8810 respirator provides lightweight, effective,

comfortable and hygienic respiratory protection against dusts

and mists. The convex shape, twin strap design, foam nose

seal and aluminium nose clip ensure a good face seal over a

wide range of face sizes.

The 3M 8810 is exempt from costly time consuming

maintenance requirements.

The 3M 8810 is quite literally "maintenance-free".

Applications

• Base Metal Manufacture

• Laboratories

• Powdered Additives

Approvals

• The 3M 8810 has been shown to meet the Basic Safety

Requirements under Article 10 and 11B of the European

Community Directive 89/686.

• Meets the performance requirements of the European

Standard for filtering facepiece dust respirators

EN149:2001 FFP2

• Is suitable for use under COSHH, CAW, CLAW and IRR

• The product is CE-marked.

Materials

The following materials are used in the production of this

product:

• Straps

• Nose-clip

• Filter/shell

• Nose foam

Weight: 8 g

• Pharmaceuticals

• Foodstuffs e.g. Bagging

• Powdered Chemicals

• Sawmills

Natural Rubber

Aluminium

Polypropylene/Polyester

Polyurethane

Standards

The product has been tested to the NEW European Norm

EN149:2001and has met the requirements of category FFP2

in this standard.

The main performance tests in this standard are:

• Filter Penetration

• Total Inward Leakage

• Flammability

• Breathing Resistance

• Performance

The 8810 is at least 92% efficient against fine dusts, water

based and non-volatile liquid aerosols down to 0.5 micron.

It offers an Assigned Protection Factor of 10* (Nominal

Protection Factor of 12); i.e., it can be used in atmospheres

containing up to 10 times the Occupational Exposure Limit

(OEL) of contaminant as specified in the Health & Safety

Executive Guidance note EH40.

* As detailed in BS4275: 1997

Warnings

• As with the use of any respiratory device, the wearer must

first be trained in the proper use of the product.

• This product does not protect the wearer against gases,

vapours, solvents from paint spray operations or atmospheres

containing less than 19.5% oxygen.

• Use only in adequately ventilated areas containing sufficient

oxygen to support life.

• Do not use when concentrations of contaminants are

immediately dangerous to life or health.

• Leave the area immediately if:

* breathing becomes difficult

* dizziness or other distress occurs

• Discard and replace respirator if it becomes damaged,

breathing resistance becomes excessive, or at the end

of one shift.

• Never alter or modify this device.