Dogtra iQ NO BARK Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici Dogtra iQ NO BARK. Dogtra iQ NO BARK 14. No bark collar
Anche per Dogtra iQ NO BARK: Manuale (2 pagine)

REPLACING THE BATTERY

1. Using a coin, unscrew the battery cover
counterclockwise.
2. Insert the two coin batteries with the plus
side facing out.
3. Make sure the rubber gasket is in place and
screw the battery cover back on clockwise.
ATTENTION!
- When the batteries are placed incorrectly,
the LED indicator light may turn on, but
the unit will not operate properly.
- The unit is working properly when the LED
indicator light blinks once. When the LED
indicator light blinks twice consecutively,
the battery will need to be replaced.
- Please remove the plastic battery seals
before installing the batteries.
RECEIVER FITTING
Proper Fit
The receiver should be fitted so that the
contact points press firmly against the dog's
skin. You should be able to fit a finger in
between the contact points and your dog's
skin. The best location is on either side of the
dog's windpipe.
Improper Fit
A loose fit can allow the collar to move around
on the dog's neck. When this happens, the
contact points may rub against the skin and
cause irritation. If the receiver is too loose, the
contact will not be consistent and cause the
corrections to be inconsistent.