Clockaudio CAP002 Manuale

Sfoglia online o scarica il pdf Manuale per Amplificatore Clockaudio CAP002. Clockaudio CAP002 3. Line level pre amplifier

The CAP002 is designed for use with an electret condenser microphone. When connected it will boost

the microphone audio output to a level that can be used to connect to a typical auxiliary line level

input commonly found on amplifiers / mixers or recorders requiring 0.5 Volts RMS (refer to your

external equipment instruction manual).

Power requirements

An external 12V to 24 DC or 24V AC supply with 100mA capacity (not supplied) is required / available

from most high street electrical retail outlets. Some DC adaptors are supplied with a plug already

attached these will need to be removed. Important that you careful check to ensure correct +/- polarity

of the 2 cables when connecting to the CAP002 pin 1 and 2 of PL2 screw terminals.

Microphone

AC/DC power adaptor

(not supplied)

Line level Pre Amplifier CAP002

Connections

CAP002 BOARD

To Mixer Input