DogWatch BIGLEASH Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Prodotto per la cura degli animali domestici DogWatch BIGLEASH. DogWatch BIGLEASH 20.

Stampa la pagina
Hold the transmitter with the antenna up.
orrect Transmitter Position
Hold the transmitter away from your body
with the antenna up for maximum range.
3.

LCD Display

The LCD display on your transmitter lets you know your system is operating
properly. The LCD display illuminates for 5 seconds when the transmitter is
turned on and when one of the command buttons is pushed.
Dog 1/Dog 2 Icon
I
which collar is receiving the signal
when working with 2 dogs.
Paw Icon
indicates that
I
the receiver collar is 'on'
and functioning properly.
Blinks when signal is lost.
Transmitter Icon
I
indicate activation when
any button is pushed.
Communication Link
I
Line
indicates the status
of the signal between the
transmitter and collar.
Solid = communicating
Blinks = correction signal
sent & received
No Line + Blinking Paw
= Not Communicating
Signal Strength
I
horizontal lines between the paw
and the transmitter icons.
Top example
Bottom example
A weak signal usually indicates the dog is moving out of range of the transmitter.
indicates
1
blinks to
is indicated by the
= strong signal, correction level 3, collar 1, and low batteries
= weak signal, correction level 9, collar 2, and good batteries.
Do not point the antenna at the dog.
Incorrect Transmitter Position
Pointing the transmitter antenna toward
your pet will reduce the signal range.
The
I
the battery needs to be charged.
Upper icon: collar battery.
Lower icon: transmitter battery.
Battery Icons
• No icon = charged battery
• Icon turns-on when battery is
about 75% depleted.
• Icon begins flashing just prior
2
to complete depletion and
shut down.
The large number displays the
I
Correction Level
1 - 3 = Mild Correction
4 - 6 = Moderate Correction
7-10 = Strong Correction
Correction Level 0 = Safety Mode
No Audible / No Correction
5
Battery Icon
displays when