DogWatch Performance Series Manuale d'uso - Pagina 12
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici DogWatch Performance Series. DogWatch Performance Series 14. Hidden fence systems
Anche per DogWatch Performance Series: Manuale di installazione (10 pagine), Manuale d'uso (16 pagine), Manuale d'uso (13 pagine)
Stampa la pagina
.................................
How The DogWatch System Works
The boundary wire creates the perimeter for the DogWatch Hidden Fence System, and
can enclose any area up to 200 acres. It is buried at least 3 - 4" beneath the surface of
the yard or can lie on top of the ground (e.g.: in wooded or rocky areas). It can also be
installed around gardens or swimming pools, or attached to an existing fence to prevent
your dog from digging under or jumping over it.
Twisted Wire
Transmitter
& Surge
Protector
Boundary Wire
Signal Field
Garden Loop
Boundary Wire: The boundary wire carries the coded radio signal around the perimeter of
your property. It is rated for underground burial.
Signal Field: The radio signal is transmitted from the boundary wire in all directions. It can
be used to keep dogs in or out of an area. The signal is adjusted by the Range control on
the Transmitter to create a signal field on each side of the wire. Your Dealer has installed
the wire to the recommended width of 8-10 feet and has carefully configured the corners to
avoid sharp angles.
Continuous Loop: In order for the system to work properly, the boundary wire must
form a continuous loop. Any break in the wire will cancel the signal field. If the bound-
ary wire is broken or unplugged, the green Loop Monitor Display (LMD) light will go
out and an audible warning will sound. Most breaks are caused by lawn/garden equip-
ment. If you cannot visibly locate the break, contact your Authorized Dealer for serv-
ice.
Surge Protector: For maximum protection against power surges, DogWatch offers
both internal an external surge protection. It is important that the surge protector be
properly grounded. This part of the system protects the transmitter from damage due
to lightning power surges. Your Dealer has attached it to the existing electrical source
house ground or a grounding rod and then connected it to the twisted wire between the
transmitter and the boundary wire.
After a lightning storm, check to be sure your transmitter is working properly.
Do not let your dog outside until you know the system is operating.
.................................
9