Aseptico CompriCart ADU-20B Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Apparecchiature mediche Aseptico CompriCart ADU-20B. Aseptico CompriCart ADU-20B 12.
Anche per Aseptico CompriCart ADU-20B: Manuale di istruzioni per il funzionamento e la manutenzione (8 pagine)
Stampa la paginaMAINTENANCE:
Because of its simple design, the Aseptico
ADU-20B CompriCart requires very little
maintenance. Any maintenance that is
needed can be performed in minutes.
1. BLEEDING THE SYSTEM - If the unit will
not be used for an extended period of
time, or the unit might be subjected to
freezing conditions, you should bleed the
system.
Simply empty the contents of the water
supply tank and install the tank back onto
the quick disconnect. Operate the air/water
syringe and highspeed handpiece with
water coolant 'ON' until just air comes
through the water lines. Pack unit and
store as normal.
2. HANDPIECE FLUSH - Flush the
handpieces for about 5 seconds after
every patient, and about 20 seconds at the
beginning of each day. Refer to page 4.
3. GENERAL CLEANING - The cart exterior
is designed to make cleaning and the use
of prophylactic barriers as easy as
possible. The external surfaces of the cart
should be cleaned using a mild solution of
liquid detergent and water. Any external
surfaces of the unit that are contacted
during use should carefully be wiped down
with a disinfectant at the beginning of each
day and between each patient.
As described in the vacuum section the
high and low volume vacuum systems
should always be thoroughly cleaned after
use.
4. PACKING THE UNIT FOR
TRANSPORTATION - If the ADU-20B unit
is going to be transported, it is
recommended that the original or similar
packing material be put into place to avoid
dents and scratches from parts inside of
the box shifting.
9