DogWatch Performance Series Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Prodotto per la cura degli animali domestici DogWatch Performance Series. DogWatch Performance Series 13. Hidden fence systems
Anche per DogWatch Performance Series: Manuale d'uso (14 pagine), Manuale di installazione (10 pagine), Manuale d'uso (16 pagine)
Stampa la pagina
Important Safeguards
DOGWATCH STRONGLY RECOMMENDS THAT YOU REMOVE THE COLLAR
AT NIGHT WHILE YOUR DOG IS INSIDE
Please read all the literature included with your DogWatch
I
before turning the system on or beginning training.
Do not attempt to shortcut the complete training of your dog.
I
I
The DogWatch Hidden Fence System is intended only for the purpose of
containing domestic dogs and cats. Use for any other purpose is at the system
owner's risk.
In the event your system requires servicing, please contact your local authorized
I
DogWatch Dealer. Attempting to service the system yourself may invalidate the
warranty.
The DogWatch Hidden Fence System is recommended for dogs six (6) months or
I
older. Your Dealer will recommend if a puppy under 6 months old is ready.
I
Keep the collar and the transmitter out of the reach of children.
Never adjust the transmitter or receiver when your dog is wearing the collar.
I
DogWatch recommends that you unplug your transmitter from the wall outlet and
I
disconnect the loop wire during lightning storms or when it is left unused for
extended periods. This will prevent possible damage from lightning and powerline
surges.
This product is only intended for use with trained domestic dogs. If your dog is
I
aggressive or violent and could cause harm to itself or others outside the fenced
premises, you should take other measures to restrain your dog such as traditional
fencing.
To contact your local dealer, please call DogWatch at 800-793-3436
or go to our website at www.dogwatch.com.
®
Hidden Fence System
2
PT4 Transmitter Features
The transmitter sends a coded digital FM radio signal through the boundary wire. This
signal can be adjusted, allowing you to control the "hidden fence" around your property.
It operates on a standard 110 volt outlet.
9
Rate
1
Power
On/Off
2
3
Power Supply
Power Pak™
Never adjust the transmitter while your dog is wearing the receiver collar.
1. Power On/Off: This switch gives you easy access to turn the transmitter on or off.
The red Power light on the front panel lets you know that it is operating.
2. Power Supply: The transmitter is powered through a power supply that is plugged
into a properly grounded 110 volt outlet. The adapter is plugged into the transmitter
jack labeled "PWR."
3. PowerPak™: Optional battery back-up system keeps the transmitter operating in
the event of a power failure. When transmitter is being powered by battery back-up,
the red power light will remain off. PowerPak plugs into the transmitter at "P-PAK".
4. Ground Wire: The green ground wire is plugged into the transmitter at the location
labeled "GND." The round connector on the green ground wire is attached under
the screw on the outlet faceplate. It will, however, only be effective if your outlet is
properly grounded. If you have any questions about having a properly grounded
outlet, consult your local electrician.
5. Loop Plug: Your system comes with zip cord with a plug on one end. This plug fits
into the hole marked "Loop" on the bottom of the transmitter. This is the beginning
of the boundary wire. Once your boundary wire has been properly installed and
plugged into the transmitter, the green Loop indicator light will turn on. If the
Monitor
4
5
Ground Wire
Loop Plug
3
8
Training
Mode
7
Range
6
Loop
Display