Doheny's ProJet Free Plus-650 Manuale di istruzioni - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per Aspiratore per piscina Doheny's ProJet Free Plus-650. Doheny's ProJet Free Plus-650 10. Battery- operated robotic pool cleaner for aboveground pools
Stampa la pagina
Battery assembly and replacement
Do not treat electrical appliances as unclassified municipal waste, use separate collection facilities. For
information on available collection systems, contact your local government.
Do not remove the lithium battery without authorization.
When removing the lithium battery from the vacuum device, please remove all metals such as rings, bracelets,
necklaces, and watches.
The short-circuit current generated by a battery is enough to adsorb the ring (or similar items), causing severe
burns.
Before removing the battery pack, please wear eye protection, gloves, and protective clothing.
Be careful not to touch the wire or any metal parts, or it will cause spark or short circuit.
Do not smoke, spark, or flame near the cleaner, or it will ignite the battery and produce gas.
Avoid exposing the battery to fire or high temperature, otherwise it may cause explosion.
In case of battery leakage, avoid contact with the damaged battery and put it in a plastic bag.
If skin or clothing is in contact with acid, wash immediately with plenty of soap and water.
If the eyes are in contact with acid, rinse the eyes with water for at least 15 minutes and send them to a doctor
for treatment.
Battery replacement (authorized repair centers only):
NOTE: User must consult dealer before any battery replacement.
Pull out the four clips of the core part of the upper cover outward and separate it from the body assembly of the bottom cover,
1.
take out the Micro patricles filer.
Use a screwdriver to remove all screws on the power cover of the bottom cover.
2.
According to the disassembly steps, re install the battery and assemble the charging parts.
4.
Note: (1) if there are impurities in the seal ring, clean it and install it back into the seal ring groove.
(2) Pay attention to the assembly direction. The six screw holes must be aligned to lock the screws.
Warning!
6
Open the battery cover, find the
3.
battery connection line, press the
clip on the connector, pull it out, and
take out the battery.
Note: wrap the connector with
insulating tape immediately to avoid
short circuit caused by contact
between two wire terminals.
.