ASG BLG-5000 Series Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Cacciavite elettrico ASG BLG-5000 Series. ASG BLG-5000 Series 17. With built in screw counter, with built in screw counter and pulse system, for use with screw counter
Anche per ASG BLG-5000 Series: Manuale operativo (7 pagine)

Stampa la pagina

Other Information

The count is to be returned

Pressing the F3 button for 2 seconds or more, resets

to the default value

the screw fastening count value.

during the screw fastening

operation.

If you fasten a screw

There may be some difference in results of motor

after the driver turns

revolutions after the driver turns counterclockwise as

counterclockwise:

the start position may have changed. In this case, the

start position needs to be reset by fastening a screw

before starting actual fastening again in order to avoid

errors.

"----" is shown on the

Once the cumulative usage count exceeds 1 million,

display.

"----" blinks on the display and the screwdriver is

locked. In such case, overhaul or maintenance is

required. Please contact ASG. Temporarily unlock the

screwdriver. Press and hold F2 and F3 buttons at the

same time.

To see the version of

Press and hold F1 button. Press F3 button (deactivate

screwdriver

screw-counter). Press and hold F1. The current version

will be displayed following the "HIOS" text. Activate

screw-counter if necessary.

BC2 Input/Output Cable

Please note the following points for use of the BC2 I/O Cable for

BLG-BC2.

1. The cable has a loop near its jack plug to reduce tension to

the cable.

2. Fix and tighten the BC2 I/O Cable in two spots with the

attached band along the driver cord.

3. Read all the instruction manuals enclosed with the products

and use them properly.

Install so hanger is on this side

Loop for reduction in ten-

sion to the cable

Ensure the cable mainte-

nance metal fittings are

mounted in the correct

location.

Ensure the jack is fully

plugged into the driver

ASG, Division of Jergens, Inc.

S. Waterloo Road | Cleveland, OH

15700

HIOS BLG Series: BLG-BC2

Operational Manual

Screwdriver Cord

Band: Tighten the cable

properly

Fix with driver cable and secure

the Input/Output Cable

| Phone: (

44110-3898

888) 486-6163

| Fax: (

| Email: [email protected] | Web: www.asg-jergens.com

216) 481-4519