Asgard FLEXISTORE 1533 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Deposito all'aperto Asgard FLEXISTORE 1533. Asgard FLEXISTORE 1533 4.
Anche per Asgard FLEXISTORE 1533: Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (4 pagine)

FLEXISTORE 1533

BASE INSTRUCTIONS

Flat and firm base. Recommended: concrete, tarmac or paving flags.

Min. distance from walls/ shrubbery: 1000mm.

Min. base size (WxDxH) 1730mm x 3770mm x 50mm.

LEVELING THE UNIT

Correctly level the constructed unit using the shims (ZCOMPPLAS)

provided prior to fixing the unit to the ground. Slide the packing pieces

under the corners of the unit base as required until an equal gap has

been achieved around the door allowing for its smooth operation and

alignment.

It is always recommended to anchor the unit to the ground. Drill through

the four holes in the base of the unit using 6mm dia masonry drill to a

depth of 70mm. Screw in the anchor fixings. (These have a self cutting

thread). If not anchoring the unit, fit the self seal plugs BEFORE

BUILDING to seal the fixing holes from underneath.

TOOLS REQUIRED

Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm

socket or spanner.

For maintenance instructions of this product visit www.asgardsss.co.uk

Warning: some panels may weigh over

20Kg. Beware of manual handling

Warning: Please keep

YOUR UNIQUE

this key card safe! Refer

KEY CODE

to if replacement key is

required.