CYP CSC-210 Manuale operativo - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo per Convertitore multimediale CYP CSC-210. CYP CSC-210 12. Video/pc/hd to uxga scaler

(4). Connecting the hardware

The video scaler is controlled via front panel push buttons or remote control and its

status is indicated by OSD display. The front panel controls are shown below.

Front Panel

CSC-210

VID/PC/HD to UXGA SCALER

Front Panel

1. Mode: Press the button repeatedly will toggle through the following adjust controls:

Source Resolution Aspect3D EnhanceDigital NRSources....

Source mode: While under this mode, press  or  button to choose your

Resolution mode: Press  or button to choose output resolution

Aspect mode: Press  or to choose between Standard,16:9 or 4:3 aspect ratio.

3D Enhance mode: To turn on or off the 3D comb filter function.

Digital NR mode: To turn on or turn off the digital noise reduction function.

desired input source from Video, S-Video, Component or PC inputs.

from 640 x 480(VGA), 800 x 600 (SVGA), 1024 x 768(XGA),

1280 x 1024(SXGA), WVGA, WXGA, 1360x768 or UXGA PC outputs.

When VCR or non-standard video source is connected to the

input the output picture may be jittering. If this occurs, please

turn off the 3D Enhance function.

Power

1 1

Mode



Picture

