CYP CSC-210 Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Convertitore multimediale CYP CSC-210. CYP CSC-210 12. Video/pc/hd to uxga scaler

(6). Remote Control

1. Power: Power ON/OFF button.

2. Display: Press the button to enable or disable the on screen display

of the resolution information.

3. C-Video: Press the button to select composite video as input source.

4. S-Video: Press the button to select S-Video as input source.

5. YPbPr: Press the button to select component video as input source.

6. PC: Press the button to select PC as input source.

7. VGA: Press the button to select 640 x 480 as output resolution.

8. SVGA: Press the button to select 800 x 600 as output resolution.

9. XGA: Press the button to select 1024 x 768 as output resolution.

10. SXGA: Press the button to select 1280 x 1024 as output resolution.

11. WVGA: Press the button to select 848x480 as output resolution.

12. WXGA: Press the button to select 1280x768 as output resolution.

13. 1360x768: Press the button to select 1360 x 768 as output resolution.

14. UXGA: Press the button to select 1600x1200 as output resolution.

15. Aspect ratio: Press the button to switch between Standard,

16 IR-Set: When front panel is locked out by RS-232, Press this button for

over 15 seconds will lift the lock out.

17. 3D: Press to turn ON/OFF the 3D enhance.

18. NR: Press to turn ON/OFF digital noise reduction.

19. Mode: Same as "mode" button on front panel.

press to toggle through

Source Resolution Aspect

3D EnhanceDigital NRSource

20. Picture: Same as picture button on

front panel. Press to toggle

through Contrast Bright

Color  Hue Detail Contrast

21. Reset: Press this button will revert picture

adjust back to factory preset value.

16:9 or 4:3 aspect ratio.

WVGA

WXGA

1360x768

UXGA

YPbPr

CR-24