CYP CSC-220 Manuali operativi - Pagina 4

Sfoglia online o scarica il pdf Manuali operativi per Convertitore multimediale CYP CSC-220. CYP CSC-220 10. Video to pc/hdtv scaler

2. Picture: Press the button to toggle through picture adjust parameters as follows:

ContrastBright  Color Hue Detail Contrast

* Contrast: Press  or  to adjust contrast level. The range of adjustment is 0~63.

Factory default value is 58.

* Bright: Press  or  to adjust Brightness level. The range of adjustment is 0~63.

Factory default value is 31.

* Color: Press  or  to adjust color level. The range of adjustment is 0~63.

Factory default value is 31.

* Hue: Press  or  to adjust NTSC Hue level. The range of adjustment is 0~63.

Factory defaults value is 31.

* Detail: Press  or  to adjust Detail level.

The range of adjustment is 0~63. Factory defaults at 10.

3.  ,  : Press to toggle through various adjust controls or to alter setting value.

4. Source/Input Selection: Press one of the four input buttons allows manual selection

* Video: Press this button to select the Composite Video source and the built-in

yellow led will illuminate when it's selected.

* S-Video: Press this button to select the S-Video source and the built-in yellow led

will illuminate when it's selected.

* YPbPr: Press this button to select the Component Video (YCbCr or YPbPr) source

and the built-in yellow led will illuminate when it's selected.

* PC: Press this button to select the PC source and the built-in yellow led will

illuminate when it's selected.

5. Output Resolution Selection: Press one of the four output buttons allows manual

- When the "6" buttion is illuminated, press to select desired PC output resolutions for

VGA, SVGA, XGA or SXGA.

- When the "6" buttion is off, press to select desired HDTV output resolutions for 480p,

576p, 720p or 1080i.

* VGA/480p: Press this button to select either VGA or 480p output resolution and

the built-in red led will illuminate when it's selected.

* SVGA/576p: Press this button to select either SVGA or 576p output resolution and

the built-in red led will illuminate when it's selected.

* XGA/720p: Press this button to select either XGA or 720p output resolution and

the built-in red led will illuminate when it's selected.

* SXGA/1080i: Press this button to select either SXGA or 1080i output resolution and

the built-in red led will illuminate when it's selected.

6. Output Format Selection: Press to select desired output format for either PC or HDTV

of the corresponding video source signal.

selection of the corresponding output resolutions.

output. Press once will turn on the built-in red led when

the PC output has been selected by pressing the button.

Press again to select the HDTV output and the built-in led

will turn off.