CYP OR-HD42S Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Commutatore a matrice CYP OR-HD42S. CYP OR-HD42S 14. V1.3 hdmi 4 x 2 matrix switcher

6. Operation Controls and Functions

RS-232

HDMI OUTPUT

EDID

STD

1. EDID Control Switch: EDID Control Switch setting is either: STD(internal) or

TV(external)*

2. RS-232 communication port: Connect to the COM (serial) port of your PC or

control device for control over settings via RS-232. Commands and settings

can be found in section 9 of this manual.

3. HDMI outputs: Connect these to your HDMI displays.

4. HDMI inputs: Connect to the HDMI or DVI (via adaptor- not included) output

of your source equipment such as a DVD player or set-top-box.

5. Power: Plug the 5V DC power supply into the unit and connect the adaptor

to an AC wall outlet.

6. IR extender input - connect the supplied IR extender to this input.

*Please Leave the EDID switch in the default factory setting of 'TV' if the displays are working

correctly, the unit will read the EDID data from the HDMI display connected to the first output and

store it. If the first device is connected via a DVI adaptor, the matrix will move on to the second

output to check for a HDMI connection. The detection priority of the matrix is v1.3 HDMI, v1.2

HDMI, DVI. If you experience any display problems with the EDID switch in the TV position, you

can set the EDID switch to STD, the unit will then use its built in EDID which supports 1080p

12bit(max) video and pcm 2 channel audio.

Please note that If you change the EDID switch's setting on the Matrix then you have to reboot

(power off, unplug and turn on again) for your selection to take effect.

HDMI INPUT

Page 3

DC 5V

5 6