Ashbys SENSEI Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Aspirapolvere Ashbys SENSEI. Ashbys SENSEI 13.

To do this remove cage from machine and hold upside down. Look for gaps between ball and

washer. Change the float cage and ball should either become distorted. Gaps will allow water

through to the vacuum motor.



Spits of water coming from the exhaust vent located at the rear of the SENSEI is a tell-tale sign of

this problem. Should this happen, stop the machine, run the vacuum motor with recovery tank

lid off and replace the float cage if necessary. We always recommend the use of Ashbys Supreme

Defoamer in recovery tank.



Polyethylene body of the SENSEI can be cleaned with a damp cloth using soapy water – avoid

electrical components and ALWAYS UNPLUG THE MACHINE FIRST.



Finally for best results & a new appearance, clean with a silicone blended finishing product such

as a Dashboard Renovator.



Servicing should be every 6 months, or as required at Ashbys premises. It is usually false

economy to run an un-serviced machine beyond this time. Include in the service hoses, hand tool

& wand.



Flow control knob should never be screwed in tightly as this can strip internal thread. Screw in

only until full flow is achieved. Do not over tighten.



The Ashbys twin jet stainless steel wand has filters which should be cleaned occasionally. These

can be removed by unscrewing the jet restraining nut, removing jet, behind which is the filter.

Clean this using a nail brush.

Page 8 of 13