CYP CH-1527TXPLV Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Trasmettitore CYP CH-1527TXPLV. CYP CH-1527TXPLV 20. 4k uhd+ hdmi over hdbaset transmitter (pse) & receiver (pd)

Stampa la pagina

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter's Front Panel

STD/HQ: This switch allows the user to select which compression

mode to use when AVLC is active.

HQ (High Quality) mode uses the least amount of compression and

provides the highest possible visual quality (perceptually identical

to the original). In this mode, AVLC compression activates for any

signal requiring more than 9Gbps.

STD (Standard Quality) mode applies additional signal reduction

methods to lower the bandwidth requirements even further,

improving transmission reliability at the cost of some visual fidelity.

In this mode, AVLC compression activates for any signal requiring

more than 7.5Gbps.

ISP: This button is reserved for factory use only.

STD/UPDATE: This switch is reserved for factory use only. The default

setting is "STD".

RS-232 IN: Connect to a PC, laptop or other serial control device

for the extension of RS-232 signals.

SYNC LED: This LED will illuminate when a live input source is

detected.

HQ/STD LED: This LED will illuminate whenever the AVLC function

is active. A green LED indicates that AVLC is in HQ (High Quality)

mode. A red LED indicates that AVLC is in STD (Standard) mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active. The LED will blink with a regular

pattern if a Receiver is connected but there is not currently a live

signal. The LED will blink with an irregular pattern if a connection

error has occurred.

UPDATE

AVLC

STD

1 2

HQ/STD

LINK