CYP CH-2527TXPL Manuale operativo - Pagina 8
Sfoglia online o scarica il pdf Manuale operativo per Trasmettitore CYP CH-2527TXPL. CYP CH-2527TXPL 16.
Stampa la pagina
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter's Front and Rear Panels
RS-232 IN
STD UPDATE
1
2
1
STD/UPDATE: This switch is reserved for factory use only.
RS-232 IN: Connect to a PC, laptop or other serial control device
2
for the extension of RS-232 signals.
3
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power via PoH.
LINK LED: This LED will illuminate solid when both Transmitter and
4
Receiver are connected and communicating with each other
properly.
5
IR2 BLASTER: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
6
IR1 EXTENDER: Connect to the supplied IR Extender cable for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with
7
a single Cat.5e/6/7 cable for transmission of all data signals.
8
HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
3
POWER
LINK
3
4
IR2
BLASTER
IR1
EXTENDER
5
6
7
HDMI IN
8