Dolby Audio ZVOX SB380 Manuale di configurazione e funzionamento - Pagina 11
Sfoglia online o scarica il pdf Manuale di configurazione e funzionamento per Sistema di altoparlanti Dolby Audio ZVOX SB380. Dolby Audio ZVOX SB380 12.
Stampa la pagina
Multiple Inputs Allows Mutiple Audio Source Inputs
For instance: If you setup your TV's optical digital cable connected to Input
1 on the ZVOX speaker, you can also connect to the 2nd optical input for a
2nd close by TV setup or the 3rd source for output from the ZVOX speaker's
RCA Input, this allows you listen to a music-only sources without needing the
TV on. This could be music from a smartphone, tablet, a disc player or the
"music only" channels from a cable or satellite set top box or computer.
When ready to hear an alternative audio source connected to Input 2 or 3
press the INPUT button on the ZVOX remote to cycle the audio inputs. A
digital signal source will appear as "In1d or In2d" and an analog signal source
will appear as "In2A".
Auto On/Off Operation
As delivered, the SB380 will turn ON and OFF automatically in response to
the audio signal from the TV and manually respond with the POWER button
on the ZVOX remote. This feature is enabled out of the box. A weak enough
audio signal may cause this feature to go off every 20 minutes. If you do not
want the SB380 to automatically turn off in response to the TV's audio signal,
the feature can be easily disabled.
To Disable or Enable Auto On/Standby feature: While the speaker is ON,
press and hold the power button on the ZVOX remote for 5 seconds, "NoAs"
will appear on the display indicating the feature is disabled, release the power
button. The system should not shut down automatically ("AS" indicates the
feature is enabled).
Infrared Sensor Window
Input Panel Infrared Sensor
The SB380 features an input panel infrared sensor. This sensor allows a
wired infrared emitter positioned in the input panel recess to control the
SB380's operation .
Controlling the ZVOX TV Speaker With Preferred Remote
The ZVOX TV speaker "learns" to respond to one of many cable/satellite or TV remote
controls. The supplied ZVOX remote control will always adjust the ZVOX SB380 even
after the preferred TV remote is programmed to control the ZVOX speaker. If these
steps do not work refer to the ZVOX support page support.zvox.com for alternate
instructions that may be specific to your preferred remote.
Note: Turn the TV OFF while following these steps for less interference. This process
will time out after 30 seconds of inactivity.
Turn the ZVOX speaker OFF, next press & hold the OTHER SETTINGS button on the
ZVOX remote for 5 seconds placing the ZVOX into the universal learn mode. ("Lrn"
will be on the SB380 display) allowing the preferred remote control to start being
programmed.
"UP1" will appear indicating the first ste for volume up on the preferred remote. Hold
down VOLUME UP for 1 full second then release. "REP" will appear indicating to
repeat the process of holding Volume Up for 1 second and releasing. GOOD will be
displayed indicating succes (NoCh appears if unsuccessful) followed by the 2nd step.
"Dn2" will appear indicating volume down on the preferred remote. Same steps, hold
down VOLUME DOWN for 1 full second then release. "REP" will appear indicating to
repeat the process of holding volume down for 1 second and releasing, "GOOD" will
appear indicating success (NoCh appears if unsuccessful) followed by the 3rd step.
Note: If noCH appears on the ZVOX display, the attempt has failed please try again.
Controlling With Preferred Remote Continued...
"-- 3" will appear indicating the mute on the preferred remote. Same
steps, hold down the MUTE button for 1 full second then release.
"REP" will appear indicating to repeat the process of holding down for
1 second and releasing "GOOD" will appear indicating success (NoCh
appears if unsuccessful) followed by the 4th and final step.
"Pr 4" will appear indicating the TV power on the Preferred remote.
Same steps, hold down the POWER for 1 full second then release.
"REP" will appear indicating to repeat the process of holding for 1
second and releasing, "GOOD" will appear indicating success (NoCh
appears if unsuccessful).