Ashdown CTM-200-RACK Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore per strumenti musicali Ashdown CTM-200-RACK. Ashdown CTM-200-RACK 12.

USER GUIDE

ASHDOWN ENGINEERING - CTM-200-RACK

FRONT PANEL FACILITIES

INPUTS - There are two inputs provided of differing sensitivities.

HIGH suits high output instruments input impedance 100k.

LOW suits low output instruments input impedance 100k.

EFFECTS SEND AND RETURN - These 1/4" jack sockets should be used to connect

to an external effects device or pedal board. The EFFECTS SEND output should

connect to the INPUT of the effects unit, and the output of the effects unit should be

connected to the EFFECTS RETURN input.

EQ CONTROLS - Fully passive equalisation featuring bass, middle, treble controls

together with an associated push button that changes the characteristics of each

control.

The bright switch adds extra brilliance when using lower stings of the Master

volume control.

GAIN - This controls the level of the signal sent to the MASTER section. To achieve a

cleaner sound, turn the GAIN control down and the MASTER up. To achieve a richer,

more distorted sound, turn the GAIN control up and the MASTER down.

MASTER - This controls the overall output of the amplifier.

MUTE - In the on position, this switch mutes the out put of the amplifier (useful for

tuning, etc.).

PRE/POST - This switch determines whether the signal from the DI OUTPUT (see

Rear Panel Facilities) is taken before/PRE the EQ section (down position) or after/

POST (up position).