Ashdown 12-BAND 600 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature musicali Ashdown 12-BAND 600. Ashdown 12-BAND 600 12.

ASHDOWN ENGINEERING - 12-BAND 600

USER GUIDE

MUTE/TUNE - The front panel MUTE switch provides a mute facility that can be

used to silence all outputs from the amplifier except that from the TUNER output

socket. This enables silent tuning to be carried out whilst the amplifier speaker

outputs, the DI the Effects Send and the Line Output are all muted. Once in tune the

amplifier can be un- muted and playing resumed. This switch can also be used as

a STANDBY switch for silencing the amplifier during pauses in its use. A blue LED

below this switch will illuminate to indicate when the amplifier is Muted.

To make use of the Tuning facility plug the output from the TUNER socket into the

INSTRUMENT input on your tuner.

OUTPUT LEVEL - The OUTPUT LEVEL control is used to set the stage volume of

the amplifier. Use this control to adjust for increases or decreases in your playing

volume and not the INPUT GAIN control, this should always be left set to the

optimum for your instrument.

LINE OUTPUT - The LINE output is for connection to external power amplifiers and

speakers to allow you to build a larger more powerful system. This output is situated

after the OUTPUT LEVEL control to allow the entire connected system to be turned

up and down with a single control.

If you require a line output that is not affected by the OUTPUT LEVEL control you

may use the EFFECTS SEND jack socket, this will obviously not include any effects

loop signal.