CYP CHDBT-1H3CE Manuale operativo - Pagina 7

Sfoglia online o scarica il pdf Manuale operativo per Cavi e connettori CYP CHDBT-1H3CE. CYP CHDBT-1H3CE 13. 1×4 hdmi over hdmi and cat5e/6/7 splitter with poe and lan serving
Anche per CYP CHDBT-1H3CE: Manuale operativo (16 pagine)

Stampa la pagina
CYP CHDBT-1H3CE Manuale operativo

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI IN
1
1
HDMI IN: Connect with source equipment such as DVD/Blu-ray or
PS3 player.
2
SYNC: This LED will illuminate when the HDMI input port connected
to the source.
3
HDMI OUT: Connect to HDMI display for instant image display or
cascade with another family type Transmitter.
4
HDMI LINK: This LED will illuminate when HDMI output is connected
to TV or display monitor.
EDID STD/TV: The default factory setting is on TV, leave as it is
5
when the display is properly. The unit will detect the 1st CAT5e/6/7
output's EDID when it obtain a 4Kx2K EDID and send out the signal
accordingly to other output ports. If the 1st CAT5e/6/7 output is
without a 4Kx2K's EDID the unit will detect all output's EDID and
send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device
will use the last output port 1's EDID when output port 1 is not
connected to a display after power cycling or switch in between
the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID's video at 1080p@60Hz and audio at LPCM 2CH.
6
SERVICE: This slot is reserved for factory service only.
POWER LED: Once the power supply is connected the LED will
7
illuminate
8
DC 24V: Plug the 24V DC power supply into the unit and connect
the adaptor to an AC outlet.
3
SYNC
HDMI OUT
2
3
LINK
EDID
SERVICE
STD
TV
4
5
6
DC 24V
POWER
7
8