CYP HDBT CHDBT-1H7CL Manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Manuale operativo per Cavi e connettori CYP HDBT CHDBT-1H7CL. CYP HDBT CHDBT-1H7CL 16. 1×8 hdmi over hdmi and cat5e/6/7 splitter

Stampa la pagina

IR OUT: Connect the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

EDID STD/TV: The default setting is TV, when in this mode, the unit

will detect the EDID settings of the display device connected to

the CAT 5e/6/7 Output 1. If it detects a 4K×2K capable EDID setting

it will transmit the signal in that format to the output port. If no 4K×2K

capable EDID is detected then the unit will detect the EDID settings

and send out the signal that all outputs can accept.

This device has a last memory function and will retain the EDID

settings of the last device connected via the CAT5e/6/7 output

port when it is not connected to a display after power cycling.

Switch to the STD setting to use the unit's built-in EDID if there are

display problems. In this mode, the video output will be set to

1080p@60Hz and the audio at LPCM 2CH Stereo.

SERVICE: Reserved for manufacturer use only.

DC 24V: Connect the 24V DC power supply to the unit and plug

the adaptor into an AC outlet.