CYP QU-10-4K22 Manuale operativo - Pagina 9
Sfoglia online o scarica il pdf Manuale operativo per Amplificatore CYP QU-10-4K22. CYP QU-10-4K22 16. 1 to 10 hdmi distribution amplifier (4k, hdcp2.2, hdmi2.0)
Stampa la pagina
proper display all screens must all be capable of displaying the same
resolution.
STD: When in 'STD' mode, the unit will use its own built-in EDID
settings. In this mode, the video output will be set to 1080p@60Hz
and the audio output at LPCM 2CH Stereo. Use this mode if there are
display problems in TV Mode.
8
SYS-RST: Set this switch to the ON position will allow the device to
reset the output to show the source every 8–10 minutes.
It will force the connected TV/display to switch to the HDMI port
that the device is connected to ensure the correct input is always
displayed. The reset will be performed sequentially from 1~10 with 1
minute interval between ports. The default setting is OFF, leave as it is
to disable the reset function.
Note: TV/monitor must be CEC compatible for this feature to function
properly.
6.2 Rear Panel
INPUT
1
2
1
1
INPUT: Connect this input to the HDMI or DVI output of the source
device such as a Blu-ray player or PC/Laptop with an HDMI cable.
2
OUTPUT 1~10: Connect to HDMI TVs, monitors or amplifiers for
digital video and audio output.
3
SERVICE: This is reserved for firmware update use only.
4
DC 5V: Connect the adapter which included in the package and
connect to AC wall outlet for power supply.
3
4
5
OUTPUT
2
6
7
8
9
10
SERVICE
DC 5V
3
4
9