Cypress MB9BF567N Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Microcontrollori Cypress MB9BF567N. Cypress MB9BF567N 12. Peripheral 32-bit microcontroller

Stampa la pagina
3

Modules Description

3.1

Power

3.2

Keys

There is an ADC key on the peripheral board, which contains 5 functions: left, right, up, down and enter
There are three Keys on the MCU board: reset, SW2 (module switch) and SW3 (module confirm)
3.3

TF card

There is a TF card socket, user can insert a card and modify system firmware to display the contents of card. In
sample code the firmware just can detect the card and show a test successful on LCD.
Operation steps:
6.
SW2 to switch the module to TF and SW3 to enter TF
7.
Press enter key to start TF operation
8.
Press right key and enter key, system will detect card
9.
After system detected a card, LCD will display
Note:
When using CSK of smart card, the jumper J12 pin1 and pin2 are need to be connected,
When using lever shift DIR control, the jumper J12 pin2 and pin3 are need to be connected
www.cypress.com
SK_FM4_U_Peripheral 32-Bit Microcontroller FM4 Family User Manual
Figure 3. Module Switch Keys
Figure 4. Operation Keys
Document No. 002-04464 Rev. *B
4