Cypress CSC-1600HD Manuale operativo - Pagina 4
Sfoglia online o scarica il pdf Manuale operativo per Convertitore multimediale Cypress CSC-1600HD. Cypress CSC-1600HD 12. Cypress video scaler csc-1600hd operation manual
Stampa la pagina4.4 Connecting the AC power
CSC-1600HD accepts AC input voltage range from 100~240V (50~60HZ).
The unit has a switching power supply installed inside that will convert the
AC input to 12V DC 1A.
* Power ON/OFF switch-Once the AC power is feed into the unit, the unit
enter into standby mode, where a limited current is provided to the
micro processor to allow the remote control to work. Press the power on
switch will turn the unit on to the normal operation status.
5. Controlling the video scaler
The video Scaler is controlled via Front Panel Push Buttons or remote control
and its status is indicated by Front Panel LED's, and OSD Display. The following
photograph shows the Front Panel Control Buttons and LED Indicators.
6. Input Selection
Pressing one of the four input Buttons allows manual selection of the
corresponding Video Input signal.
* C-Video button and LED - The LED illuminates when the composite Video
input has been selected.
* S-Video button and LED - The LED illuminates when the S-Video input has
been selected.
* YCbCr button and LED - The LED illuminates when the component.
YCbCr (or YUV) input has been selected.
* PC button and LED - The LED illuminates when the PC bypass mode has
been selected.
3