Ashly pema4125 Specifiche tecniche - Pagina 2
Sfoglia online o scarica il pdf Specifiche tecniche per Amplificatore Ashly pema4125. Ashly pema4125 5. Protea-equipped media amplifier
Stampa la paginaPEMA uses Neutrik®
Components
pema
Specifications
3.2dBu (4125/8125) 6.2dBu (4250/8250)
Input Sensitivity (Low Z models)
7.2dBu (70V/100V models)
26dB (Low Z models), 32dB (70V models)
Voltage Gain
35dB (100V models)
Damping Factor
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
Distortion
<0.5% (THD-N, typical, 8 Ohm,
10dB below rated power, 20Hz–20kHz)
Channel Separation
-80dB (dB from full output, 1kHz)
Frequency Response
20Hz–20kHz, +/-1dB
Mic/Line Input Impedance
4.8k Ohms
Mic/Line Maximum Input Level
+21dBu
Mic/Line Preamp Gain
0, +20dB, +40dB, +60dB
Mic/Line Phantom Power
+15V, switchable ch. 1-4, 5-8
3.16k Ohm (Input Impedance)
Summed Mono
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
Channel 1 TEL-PBX
+21dBu (Maximum Input Level)
Preamp Output Maximum Level
+8dBu
AUX Output Maximum Level
+20dBu
Rear Panel
Ethernet 10/100, Channel 1 TEL-PBX
Controls
Switch, Remote Standby, Preset Recall
(4), Remote Level (8), Remote Data
Input: Euroblock
Connectors (each channel)
Output: Euroblock
™
p
-e
rotea
Audio Connections
Note: 0dBu = 0.775 VRMS
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized
for consumer line level (-10dBu) devices
8 Euro connector Preamp/Aux outputs
4 or 8 Euro connector speaker outputs
CobraNet® and Dante® Digital I/O options
Remote Accessories
WR-1
WR-1.5
WR-2
WR-5
neWR-5
FR-8
FR-16
RD/RW-8C
Ashly Remote
m
a
quipped
edia
2-Channel Level Control
Level and Preset Recall
Four-Position Switch
Programmable Selector
Programmable Network Remote
8-Channel Network Fader Remote
16-Channel Network Fader Remote
Serial Data Fader Remote
Remote Control Application for Apple® iPad®
pema 8250 Rear Panel
mplifier
Power Requirements
AC Mains
Power Cable Connector
Weights and Dimensions
Dimensions
19"W x 3.5"H x 15.5"D (483mm x 89mm x 394mm)
4125/4250: 18.5lbs (8.4kg)
Unit Weight
8125/8250: 20lbs (9.09kg)
4125/4250: 26lbs (12kg) 8125: 27lbs (12kg)
Shipping Weight
8250: 28lbs (13kg)
Environmental
40-120 deg. F, (4-49 deg, C) (noncondensing)
Ashly Audio is a division of Jam Industries, Ltd.
120VAC or 240VAC, ±10%
50–60Hz
15A Edison, 3-Prong IEC