Cypress CE66058 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Interruttore Cypress CE66058. Cypress CE66058 14. Dynamically switch csd bleed resistor

Similarly,

0.60

Rbmin4 =

6∗11

In this code example, Rbmax4 is used to tune button 4 to get a raw count value of 70 percent of the maximum value. The

following sections describe the requirements, setup, and steps for running the code example.

Hardware Setup

You need the following hardware:



CY3280-24x94 Universal CapSense Controller Board



CY3280-SLM Linear Slider Module



CY3240-I2USB Bridge/MiniProg3



CY3217-MiniProg1 Programmer Kit/MiniProg3



USB A to Mini-B cable

Assembly

Figure 4

represents the hardware setup required to test the project. The CY3280-24x94 UCC Kit connects to the CY3280-SLM

module through a 22x2_RA_Receptacle. The setup uses the MiniProg1 or MiniProg3 for programming and the CY3240-I2USB

Bridge or MiniProg3 to send the data to a PC using the BCP. The MiniProg1/3 and CY3240-I2USB Bridge connect to the PC

through a USB cable.

CY3280SLM

www.cypress.com

9 kΩ

Figure 4. Hardware Setup Block Diagram

CY3280-24X94 UCC

Document No. 001-66058 Rev.*E

Dynamically Switch CSD Bleed Resistor

MiniProg1/MiniProg3

(Required for

programming)

CY3240-I2USB /

MiniProg3

(Required for debugging)