Ashly PE-800 Manuale operativo - Pagina 11
Sfoglia online o scarica il pdf Manuale operativo per Hardware del computer Ashly PE-800. Ashly PE-800 13. Pe series high performance professional power amplifiers
Anche per Ashly PE-800: Note tecniche e specifiche (2 pagine), Manuale d'installazione e d'uso (2 pagine), Scheda tecnica (2 pagine), Manuale operativo (13 pagine)
Operator Manual – PE Series Amplifiers
Page - 11
Important Safety
Instructions – 2
Introduction - 3
The following graphs are actual measurements from PE-Series amplifiers during typical use.
The PE Series - 4
Physical Description - 5
Installation – 6
Operation – 8
Troubleshooting - 9
Spec Table - 10
Gain vs. frequency, Ch1, Ch2 - (typical performance)
Gain vs. frequency / positions of HPF, Ch1, Ch2
Measurements - 11
Dimensions - 12
Warranty - 13
Phase vs. frequency, Ch1, Ch2
Phase vs. frequency / positions of HPF-Switch, Ch1, Ch2
Output impedance vs. frequency @ 1 Amp RMS injected current
THD+N @ 1 kHz, 8
load vs. input voltage, Ch1, Ch2
(Ch1, Ch2) equivalent 11 m + 2,1 μH
Damping factor into 8 , Ch1, Ch2 equation: damping factor =
THD+N vs. frequency (BW 22 kHz),
loaded impedance / amplifier output impedance
10 dB below clip, 8 , Ch1, Ch2
CCIF difference frequency method (10,5 kHz and 11,5 kHz) vs. input
SMPTE intermodulation distortion (60 Hz and 7 kHz)
level @ 8 , Ch1, Ch2
@ 8
vs. input level, Ch1, Ch2
Common mode rejection ratio (Ch1, Ch2)
Channel separation vs. frequency
@ 10 W / 8
(Ch1 => Ch2, Ch2 => Ch1)
All Rights Reserved