Cypress CHDBR-2HE Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Ricevitore Cypress CHDBR-2HE. Cypress CHDBR-2HE 16. 1 by 2 cat5e/6/7 over hdmi with lan/ir/rs232/bi-directional poe receiver
Anche per Cypress CHDBR-2HE: Manuale operativo (16 pagine)

Stampa la pagina

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CAT5e/6/7 to HDMI with LAN/IR/RS-232

HDMI OUT 1

HDMI OUT 1 & 2:

Connect to HDMI displays for instant image display or cascade

with another family type Transmitter. The unit will detect HDMI

OUT 1's EDID when it obtain a 4Kx2K EDID and send out the signal

accordingly to other output ports. If HDMI OUT 1's EDID is without a

4Kx2K's EDID the unit will detect all output's EDID and send out the

signal that all output can accept.

This device obtain last memory function therefore, the device will

use the last HDMI OUT 1's EDID when HDMI OUT 1 is not connected

to a display after power cycling or switch in between the EDID

setting.

LAN:

Connect to intranet or internet service system for a total sharing

rate of 100Mbps within the link of Receiver.

Warning: DO NOT connect this slot with any of the CAT5e/6/7 port,

doing so may trigger a power shot down and ruin the device.

RS-232 OUT:

Connect to a RS-232 enabled device (with supplied 3.5mm

Phone Jack to D-Sub 9-Pin male adaptor) for transmit of RS-232

commands.

HDMI OUT 2

Receiver

LAN

RS-232 OUT