Cypress Envirosystems WPT-810-RPT Manuale di installazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di installazione per Termostato Cypress Envirosystems WPT-810-RPT. Cypress Envirosystems WPT-810-RPT 12. Wireless pneumatic thermostat
Anche per Cypress Envirosystems WPT-810-RPT: Funzionamento e manutenzione (10 pagine)
Stampa la pagina
2. Mount the RPT on the universal wall bracket using the captive screws.
recommended to run the low voltage power wires through the large hole in the center
of the repeater base plate. The wire should be strain relieved to prevent stress or
fatiguing at the terminal strip connection points. See Figure 5 below.
Route cable
service loop
to provide
strain relief
Non polarity
sensitive AC
connector
Polarity
sensitive DC
connector
Figure 5. Internal Cable Routing Recommendation
RPT Installation Manual
Doc No. 910-00027-01 Rev 01
Page 7 of 12
It is