Cypress Semiconductor CY8CKIT-062S2-43012 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Microcontrollori Cypress Semiconductor CY8CKIT-062S2-43012. Cypress Semiconductor CY8CKIT-062S2-43012 2.

Stampa la pagina

• Before starting, ensure you have the following.

• PC with USB port

• UART terminal software such as Tera Term

or Minicom

• Visit the kit website to download and install the

required software

• Ensure the jumper J14 is at position 2-3 to select 3.3V

• Connect the KitProg3 USB connector (J6) to your PC

• Wait for the drivers installation to complete

CY8CKIT-062S2-43012 QUICK START GUIDE

62S2 Wi Fi BT PIONEER KIT

Kit Contents:

1 PSoC® 62S2 Wi-Fi BT Pioneer Board

2 USB Type-A to Micro-B cable

3 Four jumper wires (four inches each)

4 Two jumper wires ( ve inches each)

5 Quick Start Guide (this document)

www.cypress.com/CY8CKIT-062S2-43012

• Open the UART terminal software and connect to

the kit's USB-UART COM port with the settings

– Baud rate: 115200, Data: 8 bit, Parity: None, Stop

bit: 1 bit, Flow control: None

• Press the XRES switch (SW1) to reset the device

• Follow the instructions displayed on the UART

terminal to use the pre-programmed code example

Refer to the Kit Guide available at the kit website

for details.