Cyron PRO HD HTW1012 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Controllore Cyron PRO HD HTW1012. Cyron PRO HD HTW1012 12. Media highlighter rgb wireless controller

Stampa la pagina

Turn-off timer. There are 5 timers of 1, 2, 3, 4 and 5 hours.

Each time the button is pressed the lights will flash according

to the number of hours.

>First press; lights flash once; system turns off in 1 hour.

>Second press; lights flash twice; system turns off in 2 hours.

>Third press; lights flash three times; system turns off in 3

hours.

Same applies for up to 5 hours. Press again to go back to 1

hour.

Red, Green and Blue COLOR DIALS allow adjustment of

each color from zero brightness to full brightness in very finite

steps. The number of steps (modulation resolutions) is

explained on Page 7 in Hi Def Modulation section. The UP

arrows increase and down arrows decrease the brightness level

of each particular color. By combining different levels of each

color more than 500,000 color and brightness combinations

will be possible. Use COLOR DIALS to match décor colors,

create varies tones of white light, or reduce the brightness of

colors. See Memory function below to save a custom color.

COLOR DIALS only operate on memorized colors and

PAUSED colors.

You cannot press-and-hold to rapidly change thru the

steps. Buttons must be pressed once for each step.

MUSIC MODE. The lights will change colors and interact

with sound. There are two ways to take advantage of this

feature.

a. Built in Microphone: A microphone is placed

inside the controller which can pick up ambient

sound. If the ambient sound is loud enough the lights

will start to interact. Placement of the controller box

and the amplitude of sound plays a big role in how

well the Music Light will work.

b. Audio Input: Alternatively, you may plug the

headphone output of a stereo system or personal

music player to the MIC input. A cord has been

provided. Depending on your audio system you may

need a different type of connection. The built-in

microphone is disable once the cord has been

plugged into the controller.