Cyrus CD i Istruzioni per l'utente - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'utente per Impianto stereo Cyrus CD i. Cyrus CD i 15. Hi-fi
Anche per Cyrus CD i: Istruzioni per l'utente (18 pagine)

Stampa la pagina

Cyrus CD i

User Instructions

Connecting to the AC Mains Supply

Connect the socket on the AC Power cable to the AC Power inlet f on

the rear panel of the CD i. Now connect the cable to a suitable AC power

point.

There is no mains power switch on the CD i. To switch off the mains

supply to the CD i remove the plug from the wall outlet. For this reason,

ensure that the plug is easily accessible when installing the unit.

Connecting to the System Amplifier

Connect a suitable stereo RCA phono interconnect to the audio output

sockets b of the CD i and the corresponding input of the amplifier or

receiver. Amplifier inputs suitable for this purpose are CD or AUX inputs.

Dual outputs are provided for convenient connection to multiroom units or

for direct connection to tape/disc recorders etc.

DO NOT connect the CD i to the PHONO input of the amplifier, as this could

damage your amplifier or speakers.

Connecting an External d/A Converter

The CD i provides a digital output to drive an external D/A converter.

Using a digital interconnect, connect the DIGITAL OPTICAL c or DIGITAL

COAXIAL d to the input of a suitable D/A converter and connect the

converter's audio outputs to a suitable input of the amplifier. Refer to the

D/A converter handbook for guidance.

The DIGITAL COAXIAL connection is recommended where this connection

is available.

Connecting a Cyrus PSX-R

The Cyrus PSX-R is a high quality regulated power supply, the use of which

will elevate your CD i into a true world-class state-of-the-art product.

The connector fitted to the umbilical cable from the PSX-R must be

securely connected to the PSX-R socket e on the rear of the CD i. When

correctly fitted, the connector will latch into the socket.

NOTE: The PSX-R power supply and the CD i will both require connection

to the mains supply.

NOTE: Connection of a PSX-R is detected automatically, so no internal

adjustments are required.

MC-BuS System Connection (Optional)

By using the MC-BUS connection on your CD i, a highly functional

integrated system with full remote control may be set up. This feature

is usable if you own a Cyrus amplifier. Refer to the relevant product

handbook for MC-BUS wiring instructions.