Cyrus dAD1 Istruzioni per l'utente - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lettore CD Cyrus dAD1. Cyrus dAD1 13.

Stampa la pagina
Cyrus dAD1
SUPPLY VOLTAGE
Your dAD1 is factory set to operate from a fixed mains
supply voltage, which is marked on a label at the rear of
the unit. Before connecting, check that this voltage is the
same as your mains supply, i.e.
230V Products
115V Products
LOCATION
Install the dAD1 in a well-ventilated location where it will
not be exposed to high temperature or humidity. Avoid
installing the dAD1 in a location which is exposed to
direct rays of sun, or near hot appliances or radiators.
Placing or using the dAD1 for long periods on heat-
generating sources will affect performance and may
damage the cabinet. Installation in a damp or dusty
environment may result in malfunction or accident.
PRECAUTIONS REGARDING INSTALLATION
Do not let any liquid or foreign object fall into this unit.
Avoid running the power cord over or near sharp objects.
If the dAD1 is not to be used for a long period of time,
unplug the unit from the mains power supply. This unit
contains no user serviceable parts. Never remove any
panels from the unit or attempt to service it. In the rare
event of a failure, refer to qualified service personnel.
3
Voltage Range 220V-240V
Voltage Range 110V-120V
RE-LOCATING
The dAD1 is supplied specifically for use in your location.
Consult your Cyrus distributor to arrange for conversion
of your dAD1 should you move to another area with
different mains voltage requirements.
The dAD1 may be positioned as a freestanding unit or
alongside a partnering Cyrus unit. Never stand it on top of
a power amplifier which may generate heat. The dAD1
must always sit horizontally on a flat firm surface.
Important Note for UK Customers
The mains lead of this unit is fitted with a UK 13A Plug.
Do NOT disassemble this plug. If for any reason you
remove the plug, dispose of it safely and do not attempt to
re-use it.
The wires in the mains lead are coloured in accordance
with the following code: Blue - neutral, Brown - live.
If these colours do not correspond with the coloured
markings identifying the terminals on your new mains
plug:
Connect the Blue wire to the terminal which is marked
with the letter N or coloured Black.
Connect the Brown wire to the terminal which is marked
with the letter L or coloured Red.
Ensure that your equipment is connected correctly. If in
doubt, consult a qualified electrician

CAUTIONS

.
English