Cyrus PSX-R2 Istruzioni per l'utente - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per l'utente per Alimentazione Cyrus PSX-R2. Cyrus PSX-R2 10.

Cyrus PSX-R

MADE IN ENGLAND

Connect the socket on the AC Power cable to the Power

inlet c on the rear panel of the PSX-R

cable to a suitable AC power point.

NOTE: The means to disconnect this product from the

mains supply is the mains plug. ensure that the mains plug

is accessible at all times.

INSTAllATION

Power switch

Mains fuse

. Now connect the

USE PSX-R WITH

DESIGNATED CYRUS

PRODUCTS ONLY

Power inlet

Output cable

Connecting the PSX-R

Only one connection is necessary from the PSX-R

supply to a Cyrus product. The 5 pin connector d fitted

to the umbilical cable must be securely connected to the

socket marked PSX-R on the rear of the partnering Cyrus

product. When correctly fitted, the connector will latch into

place in the socket. Note that when a PSX-R

the PSX-R

power supply and the Cyrus product will require

connection to the mains supply.

When used with a Cyrus III, Cyrus IIIi, Cyrus 7 or Cyrus

Power, the amplifier must be internally changed to accept

this external power supply. This modification should only be

carried out by an appointed Cyrus Dealer. If you decide to

use a modified component without a Cyrus PSX-R

must be re-configured.

User Instructions

REGULATED

DC OUTPUT

to Cyrus Products

is in use, both

power

, the unit