Cyrus DVD8 Istruzioni per l'utente - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lettore DVD Cyrus DVD8. Cyrus DVD8 13.

Stampa la pagina

Cyrus DVD8

OPERATION

Switching On

The mains power to the DVD8 should normally be left on unless left

unattended for a long period when the mains power at the wall socket should

be switched off or the product disconnected from the AC supply.

When power is applied, the STANDBY key 1) is used for power control. The

Standby light 1! shows red when the DVD8 is in Standby and green when

operational. At this time the 'CYRUS' logo will also show on the TV screen.

NOTE: If the DVD8 is set to a mode which shows a still picture or the logo

screen for more than 15 minutes, the image brightness is decreased to

reduce the possibility of damage to the TV screen.

Disc Compatibility

The DVD8 is compatible with DVD-Video discs, VCD Video-CDs and audio

CDs. Instructions for playing each type of disc follow the next section.

NOTE: DVD-Video discs include a global 'region' identifier. The DVD8 will

only play discs purchased in the same global region as the player. The region

setting of the DVD8 is shown on a globe symbol at the rear of the player.

Ensure that all discs purchased have the same region symbol as the player or

are marked region 0 which will play in any global region.

Loading a Disc

Press the OPEN key 1$ to open the disc tray. Place a disc in the tray with the

label side upward. Press the OPEN key 1$ again. The disc tray will load into

the player. The DVD8 display will show 'Reading' while checking the contents

of the disc.

Quick Reference Guide to the Front Panel

Functions

(Fig.2)

10. Standby......................................Switches the DVD8 on and off.

11. Standby Light.............................Indicates when the player is set to

12. Remote Eye ...............................Remote command receiver.

13. Display Window .........................DVD8 status display.

14. Open ..........................................Opens the disc loading drawer.

15. Disc loading tray ........................Load all discs label side up.

16. Repeat .......................................Sets repeat modes.

17. Skip/Search Forward .................Press briefly to skip forward, hold to set

18. Skip/Search Reverse .................Press briefly to skip forward, hold to set

19. Stop............................................Stops play.

20. Pause.........................................Pauses playback with still picture. Press

21. Play ............................................Sets normal playback.

Standby.

fast search forward.

fast search reverse.

again for frame advance.

Quick Reference Guide to the Handset Functions

The System Navigator remote control handset supplied with the DVD8 will

additionally send commands to Cyrus surround decoders, stereo amplifiers,

CD players, and tuners. You can therefore build a two channel or multi-

channel system around the DVD8 and control all functions with one handset.

Compatible products (at the time of publishing)

DVD players .......................Cyrus DVD8, Cyrus DVD7+, Cyrus DVD7.

Surround decoders.............Cyrus AV8, Cyrus AV5.

Stereo amplifiers ................Cyrus 8, Cyrus 7, Cyrus 6, Cyrus 5, Cyrus aCA7,

Cyrus aCA7.5, Cyrus IIIi, Cyrus III, Cyrus Pre.

CD players..........................Cyrus CD7, Cyrus dAD3, Cyrus dAD1, Cyrus

dAD7, Cyrus Discmaster/Dacmaster.

Tuners ...............................Cyrus FM7, Cyrus FM7.5.

NOTE:- for some additional functions such as system set-up of a surround

decoder, the original handset supplied with the equipment may be required to

access the full system functionality.

POWER CONTROL AND SELECTING SYSTEM COMPONENTS

The yellow system select keys are used to select which part of your system

you want to control and to turn on the power for the correct components. The

System Navigator retains this setting until it is next changed.

•

Press AV/DVD to set the handset to AV/DVD mode and switch on the

DVD8 and a surround decoder. This key will also switch on a Cyrus

stereo amplifier (when used) and select the AV/VI input.

•

Press CD to set the handset to CD mode and switch on the CD player

and a stereo amplifier. This key will also select the correct CD input of a

stereo amplifier.

•

Press TUNER to set the handset to TUNER mode and switch on an FM

tuner and a stereo amplifier. This key will also select the correct TU input

of a stereo amplifier.

•

Press AMP to set the handset to AMPLIFIER mode and switch on a

stereo amplifier only. The last used input will remain selected.

Refer to the command table on the next page for a list of all functions

available to each unit controlled from the System Navigator.

User Instructions