EG Vienna 250 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Bicicletta EG Vienna 250. EG Vienna 250 9. Folding electric bicycle
Anche per EG Vienna 250: Manuale d'uso (8 pagine)

Stampa la pagina
To install the saddle, insert the saddle post into the seat tube and then secure the saddle
6.
post by tightening the quick release lever.
Unfold the pedals by gently lifting them horizontally and they will lock into place.
7.
The front and rear LED lamps are installed for you. To open the LED rear reflector use a
8.
Philips head screw driver to slowly pry it open.
! WARNING: Be sure the main Li-on battery is installed properly before riding the bicycle.
9.
If the Battery is installed wrongly, it may damage the battery case railing or cause the
battery to fall off the bike.
! WARNING: Do NOT sit on, place anything on or tie anything to the battery while
10.
installed on the bike under any circumstances. Doing so can damage the battery holder.
11. Install the Main Li-ion battery. Ensure both side rails and the spade piece of the metal
holder are totally inserted into the battery on the underside. Then, lock in the battery in
place with the key.
! WARNING: Before riding ensure the battery has been installed properly by inspecting
12.
the mount from the bottom to ensure there is no gap between the holder and the battery.

How to Fold the Bicycle

Option 1:
1.
2.
3.
4.
5.
6.
Option 2:
1. Lower your saddle and secure your saddle post quick release.
2. ! WARNING: if your pedals don't fold easily do not force them to do so, or you will risk
breaking the pedals.
3. Next fold, the pedals, by gently pressing in the pedals horizontally and then they will
effortlessly fold into their natural vertical position.
Fold the frame of the bike in half by bringing the quick release clamp in the middle of
4.
frame of your bike first forward to release the clamp and then bring the entire lever
including the clamp backwards to unhook the quick release from the frame. Gently lift the
lever upward to unlock the vertical latch of the quick release. While lifting the quick
release lever, bend the frame to fold the bike.
Lastly fold the handlebar stem by lifting the security buckle, and then lowering the stem
5.
quick release. Fold the stem downward.

OPERATION INSTRUCTIONS

3