EG Vienna 250 Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Bicicletta EG Vienna 250. EG Vienna 250 8. Folding electric bicycle
Anche per EG Vienna 250: Manuale d'uso (9 pagine)

Stampa la pagina

INSTALLATION INSTRUCTIONS

How to Install/Unfold the bicycle out of the box

1. Your folding bike is 95% installed. All you need to do is unfold the bike, insert the handle

bar stem and insert the seat. ALL of which are secured using quick releases.

2. To begin, unpack the bicycle from the box and cut all the ties that held the bicycle

together during shipping.

3. Unfold the frame of the bike while gently lifting the Quick Release upward. When the

main frame of the bike has straightened completely, release the quick release and bring

the lever all the way to the front of the bike. Then, securing the quick release.

4. Unfold the Handle stem (where the handlebar fits into) section of the bike. Then, bring the

quick release over to the top portion of the bike and secure the lever.

5. ! WARNING: the seat post tube must be firmly secured before riding the bike.

6. Install the saddle and the handle bar for the bicycle. Both the saddle and the handle bar

can be installed by tightening and locking in their respective quick releases.

7. Unfold the pedals by gently lifting them horizontally and they will lock into place.

8. A front and rear LED lamp is installed on your EG Vienna folding bicycle. To run this

lamp, simply click the button on the top of the front LED and flip the switch on the rear