BluePoint Fasteners BP-361M Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico BluePoint Fasteners BP-361M. BluePoint Fasteners BP-361M 18.

SERVICE (CHANGING THE PISTON AND PISTON BRAKE)

Remove the cartridge strip from the

tool.

If the piston sticks in the piston

guide, the entire piston guide must

be removed (see section

<<cleaning>>). Push the piston

through the cartridge chamber.

NOTE: Do Not grind the piston.

If the piston is shorter than the

tool; it will not work correctly.

Turn the black housing one whole

revolution (360 counter clockwise).

This will release the piston stoppers

so you can remove the piston from

the tool.

This is typical wear of piston.

OPERATING MAINTENANCE

NOTE: THE TOOL SHOULD BE CLEANED ONCE A WEEK

WARNING!

Remove the

cartridge strip from the

tool first.

Unscrew the black housing counter

clockwise fully.

Release the black housing & screw

on one or two turns.

Push back the piston guide with the

palm of the hand to release the

piston stoppers and then remove

the complete unit.

Push in the stoppers when the

piston guide is so far in, that the

stoppers fit into the sleeve on the

piston guide openings.

Insert the piston all the way to the

back (NOTE: the piston can be

inserted anytime before the last

whole turn) then finish screwing on

the black housing until it engages.