EG4 EG4-LL Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Pacco batteria EG4 EG4-LL. EG4 EG4-LL 20. Rack mounted 48v 100ah/24v 200ah

About This Manual

Purpose

This manual describes installation, commissioning, operation, and troubleshooting. Please read the

manual fully and carefully before installing and operating. Keep this manual for future use.

Scope

This manual provides basic installation guidelines as well as information on tools and wiring.

Safety Notice

Attention: The following contains important safety and operating instructions. Read and

keep this manual for future reference.

1. Before installing or using the unit read all instructions and cautionary markings on the unit and all

appropriate sections of the manual.

2. CAUTION - Do not disassemble the unit. Take it to a qualified service center when service or

repair is required. Incorrect re-assembly may result in a risk of electric shock or fire.

3. To reduce the risk of electric shock, shutdown and disconnect all wiring before attempting any

maintenance or cleaning. Turning off the unit alone will not reduce the risk of shock or injury.

4. CAUTION - Only qualified personnel can install this equipment.

5. NEVER charge a battery below the specified minimum temperature; refer to the battery data

sheet.

6. Wire size is critical for safe operation, and optimal performance of the equipment. Refer to an

accredited sizing resource or cable manufacturer specifications to meet charge/discharge

requirements.

7. Use caution when working with metal tools on or around all systems and batteries. Risk of

electrical arcs and/or short circuiting of equipment can lead to severe injury and damage.

8. Strictly follow installation procedure when connecting/disconnecting DC terminals. Refer to the

Installation section of this manual for details.

9. The included breaker is not a guarantee of battery protection. Size and install the correct

overcurrent protection for conductors and battery if not included with the product.

10. Grounding - The grounding system must meet the Authority Having Jurisdiction (AHJ)

requirements for your area.

11. NEVER short DC inputs. Do NOT connect the system to the grid with a shorted DC input.

12. WARNING - Only qualified service personnel are able to service this equipment. If errors persist

after following the troubleshooting table, please contact your retailer for further assistance.