Asko 1805 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Lavastoviglie Asko 1805. Asko 1805 2. User manual use & care guide general fr (french version)
Anche per Asko 1805: Manuale d'uso (20 pagine), (Spagnolo) Uso e cura (12 pagine), (Francese) Manuel D'utilisation Et D'entretien (12 pagine)

Stampa la pagina
Q Q Q Q Q UICK ST
UICK ST
UICK ST
UICK ST
UICK STAR
Q Q Q Q Q UICK ST
UICK ST
UICK ST
UICK STAR
UICK ST
1.
Load the dishwasher. (There's no need to pre-rinse. Simply scrape off large food particles before
you load the dishware.)
2.
After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray arms
to be sure they turn freely.
3.
Make sure there is rinse aid in the dispenser. Add rinse aid, if needed.
4.
Add automatic dishwashing detergent and close the dispenser cover. (See "Amount of Detergent to
Use" below.)
5.
Press the On/Off button on the left side of the control panel.
6.
Select the desired wash program and option(s). A red light appears above the selected touchpad(s).
7.
Press Start. The panel lights will flash rapidly left to right to indicate the unit is ready.
8.
Close the door securely. The dishwasher will start.
AMOUNT OF DETERGENT TO USE
AMOUNT OF DETERGENT TO USE
AMOUNT OF DETERGENT TO USE
AMOUNT OF DETERGENT TO USE
AMOUNT OF DETERGENT TO USE
We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is
needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent
needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5.) In any
case, you should never use more than three tablespoons of detergent.
TEMPERA
TEMPERATURE OPTIONS
TEMPERA
TURE OPTIONS
TURE OPTIONS
TURE OPTIONS
TEMPERA
TEMPERA
TURE OPTIONS
You can select high or low water temperatures for the wash programs
(except Rinse). The table to the right shows the temperature options for
each program. We recommend that you use the lower temperature settings
Temp
whenever possible to conserve energy.
The indicator light glows if the temperature is set on high and it remains black if set
on low. Once you select a temperature option, it will remain selected until you change
it (except the Quick wash, which reverts to 130° F).
CHANGING
CHANGING
CHANGING A PR
A PR
A PR
A PROGRAM
CHANGING
CHANGING
A PR
The dishwasher is programmed to stop operating if the door is opened during a cycle. If you want to change a program or option
after you start the machine, open the door slightly to let the spray arms stop rotating and avoid getting sprayed with water. Press and
hold Start for five seconds to cancel the current selection then press the touchpad(s) for your desired selection. Press Start again
and close the door. The drain pump will run to remove any dirty water from the dishwasher before starting the newly selected cycle.
UNDERSTANDING
UNDERST
UNDERST
ANDING THE INDICA
ANDING
ANDING
UNDERST
UNDERST
ANDING
When you press Start, the indicator lights will flash rapidly, alternating between the four lights on the left and the four on the right.
This merely means the unit is ready. Simply close the door securely to start the machine.
If you open the door and the lights flash, the program has not finished. Close the door and let the machine complete the program.
When the dishwasher is done, the indicator lights will come on for the last wash program and options that you used. (NOTE: The
machine will not retain the Rinse or Quick program; it will revert to the Normal wash program.)
COMMONLY Y Y Y Y ASKED Q
COMMONL
COMMONL
ASKED Q
ASKED QUESTIONS
ASKED Q
COMMONL
COMMONL
ASKED Q
1)
Where do I put the prewash detergent?
2)
Where do I put the rinse aid?
3)
How do I know when the dishwasher is done?
4)
Why do the lights flash back and forth?
5)
Why do the lights flash when I open the door?
6)
Why does my dishwasher run so long?
7)
Why am I getting a white film on my dishes?
8)
Why is there always water left in the bottom of
my machine?
AR
AR
T PR
T PR
OCEDURES
OCEDURES
AR
ART PR
T PR
T PROCEDURES
OCEDURES
OCEDURES
ART PR
AR
AR
AR
T PR
T PR
T PROCEDURES
T PR
OCEDURES
OCEDURES
OCEDURES
OCEDURES
OGRAM AFTER
OGRAM
OGRAM
AFTER
AFTER Y Y Y Y Y OU'VE ST
AFTER
OGRAM
AFTER
THE INDICA
THE INDICAT T T T T OR LIGHTS
THE INDICA
THE INDICA
UESTIONS
UESTIONS
UESTIONS
UESTIONS
OU'VE ST
OU'VE ST
OU'VE STAR
OU'VE ST
OR LIGHTS
OR LIGHTS
OR LIGHTS
OR LIGHTS
1)
It goes into the small compartment between the main detergent
compartment and the rinse aid dispenser. (See page 4.)
2)
The rinse aid goes into the rinse aid dispenser. (See page 5.)
3)
See "Understanding the Indicator Lights" above.
4)
See "Understanding the Indicator Lights" above.
5)
See "Understanding the Indicator Lights" above.
6)
If the temperature of the water entering your dishwasher is below
120°, the dishwasher runs longer because it heats the water to the
proper temperature for the program selected. Raising your water
heater setting may help shorten the cycle times. If this doesn't
resolve the problem, call the ASKO Advisory Center.
7)
You may be using too much detergent or washing your dishes in
water that is too hot. Try using less detergent and a lower
temperature setting. (See pages 5 and 8.)
8)
It's normal to have some water left in the sump area near the
drain. If the water fills more than the drain area, see page 9 for
possible solutions.
Refer to this
Refer to this
Refer to this
Refer to this
Refer to this
Refer to this page in
page in the Use
page in the Use
page in the Use
page in the Use
page in the Use
the Use & Care Guide .
& Care Guide.
& Care Guide.
& Care Guide.
& Care Guide.
& Care Guide.
Temperature Options
Program
High
Pans
160°
Normal
150°
Quick
130°
ARTED
AR
AR
TED
TED THE UNIT
TED
THE UNIT
THE UNIT
THE UNIT
AR
TED
THE UNIT
ANSWERS
ANSWERS
ANSWERS
ANSWERS
ANSWERS
3, 4
3
5, 6
4, 5
Low
130°
130°
120°