Asko D3252 Manuale d'uso e manutenzione - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Lavastoviglie Asko D3252. Asko D3252 16. User manual d3252 use & care guide fr
Anche per Asko D3252: Manuale di avvio rapido (2 pagine), (Spagnolo) Uso e cura (16 pagine), (Francese) Manuale d'uso (16 pagine)

Stampa la pagina

W W W W W A A A A A TER SOFTENER CONT

TER SOFTENER CONTAINER

TER SOFTENER CONT

To determine the water hardness in your area, contact

your local water utility or area water softening company.

Twelve grains and higher is extremely hard water and

you may need to use a water softener to maximize the

performance of your dishwasher.

FILLING THE SOFTENER

CONTAINER

CONT

AINER

CONT

AINER

If you decide you need a water softener, fill the softener

container with salt as follows:

1. Unscrew and remove the container cover.

2. Place the funnel supplied with the dishwasher into

the fill hole.

3. Pour in approximately 4 cups (1 litre) of water.

4. Pour in about 3 pounds (1.5 kg) of coarse salt or

special dishwasher salt.

5. Wipe away excess salt so the cover can be properly

screwed into place.

6. Run a Normal wash program so that any salt in the

machine is rinsed out.

WARNING!

Never pour dishwasher detergent into the softener

container. It will ruin the water softener.

SETTING WA

SETTING

WATER HARDNESS

TER HARDNESS

The dishwasher is delivered with the low water

hardness setting, so you may need to reset it. To do

this, follow the steps below:

1. Turn off the power to the dishwasher.

2. Hold down the Start/Stop button while you press the

Power button to turn the machine back on.

3. Release the Start/Stop button.

Page 6

AINER

(MODEL D3252FIWS ONL

(MODEL D3252FIWS ONLY)

(MODEL D3252FIWS ONL

Water

softener

container

REFILLING

REFILLING THE CONT

REFILLING

When the salt container needs to be refilled, the softener

refill indicator light on the control panel will come on

(see page 8). Follow the instructions above ("Filling the

Softener Container"), except for adding water. That only

needs to be done the first time you add salt.

After you have refilled the container, there may be a

slight delay before the indicator light goes off.

4. Press the program button one to six times,

depending on the hardness of the water.

With each press of the Program button, a program

indicator light will come on. Using the table below,

determine the setting you need.

5. When the appropriate symbols are lit, press the Start/

Stop button to store the setting.

THE CONT

AINER

THE CONT

THE CONTAINER

AINER