1010music Bluebox 1.0 Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per Mixer musicale 1010music Bluebox 1.0. 1010music Bluebox 1.0 4.
Stampa la pagina
RECORD AND PLAYBACK TRACKS
1. Push MIXER. Touch Rec at the bottom of the screen. Touch tracks or the
Main meter to arm them for recording. Armed tracks have a red border.
2. Hold REC and push PLAY to start recording.
3. Push STOP to end recording. The recordings are saved to the microSD card
as WAV files, one for each track and one for the Main.
4. Disarm a track for recording and push PLAY to play the latest recording for
that track.
5. Push EDIT to see the list of recordings for each track. Main recordings are not
listed here.
6. Turn a knob to select a recording. Push A to toggle the Active playback state.
The Active recording will play when you push PLAY and the corresponding
track is not armed for recording.
7. Touch File and then Rename to change the name of the WAV file.
8. Touch File and then Delete to remove a WAV file from the list and delete it
from the microSD card.
9. You can take the microSD card to your computer or other device to work with
the WAV files. The files are stored in the folder \Projects\<Project Name>.
MANAGE PROJECTS
Bluebox stores all of your settings and the collection of WAV recordings in a project. You are working with
the default project when you first start up bluebox. You can create different projects as needed. The WAV
files you record will stay with your project, but you must save the project if you want other settings, such
as track mappings and EQ settings, to persist after you change projects or power down bluebox.
To Save the Current Project:
1. Push PROJ.
2. Touch Save.
To Manage Projects:
1. Push PROJ.
2. Touch File.
3. Touch the file option you want: New,
SaveAs, Rename or Delete.
SLEEP MODE
In sleep mode, the bluebox stops sending signals to the outputs and darkens the screen, reducing power
consumption. To enter sleep mode press and hold B until the screen goes dark. To wake up, push a
white button.
ADJUST THE CLOCK
Bluebox uses a clock to synchronize the delay effect. You can manually set the tempo in bluebox or you
can connect an external MIDI device to follow an external clock. You can also use MIDI out to send the
clock signal to other devices.
To Set the Tempo:
1. Push PROJ, then Push B.
2. Turn a top knob to highlight BPM, and then turn a bottom knob to adjust the BPM.
Copyright 2020 by 1010music LLC
To Manage Project Settings:
1. Push PROJ, then push B.
2. Use a top knob to select a parameter and a
bottom knob to change it's value.
To Load a Different Project:
1. Push PROJ.
2. Turn a knob to select a project.
3. Touch Load. Note: Load is disabled for the
currently loaded project.
Page 3