d&b audiotechnik Z54003 Istruzioni per il montaggio - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Cremagliere e cavalletti d&b audiotechnik Z54003. d&b audiotechnik Z54003 20.

Attaching the cabinet to the wall mount

NOTICE!

▪ Only use the supplied and specified screws [2], otherwise there

a risk of damaging the threaded inserts.

▪ Always use the supplied spring washers [3] to prevent the bolts

from slackening.

Tools required:

▪ Open-ended spanner/wrench (size #13)

1. Attach the wall mount to the two M8 threaded inserts on the

rear panel of the cabinet.

2. Insert the screws together with the spring washers and tighten

them.

1.6. Vertical and horizontal alignment

The wall mounts allow both vertical and horizontal alignment of the

cabinets. The possible vertical and horizontal angle settings

depend on the cabinet size, the deployment of the cabinets

(vertical or horizontal setup) and the type of wall mount used. The

various options and angle settings including the built-in dimensions

are detailed in Þ Chapter 2. "Fixing templates" on page 8.

Tools required:

▪ Open-ended spanner/wrench (size #13)

▪ Allen hex key (6 mm).

Vertical alignment

The wall mounts are equipped with a stop screw [B] to allow a

precise vertical alignment of the cabinet.

1. Slacken the stop screw [B].

2. Slightly slacken the fixing bolt [F].

3. Set the cabinet to the desired vertical angle.

4. Adjust the stop screw [B] until the desired angle is finally set.

5. Tighten the counter nut [C] to fix the adjustment.

6. Retighten the fixing bolt.

d&b Z5402/03 Mounting instructions 1.1 en