d&b audiotechnik TI 316 Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Amplificatore d&b audiotechnik TI 316. d&b audiotechnik TI 316 4. Qsc q-sys plug-in for 5d, 10d, 30d, 40d, d20, d40 and d80 amplifiers

Stampa la pagina
3. Plug-in details overview
Amplifier Settings/Status
[1]
Enter the amplifier's IP address here.
[2]
The
«Online»
LED illuminates to indicate a
successful network connection to the amplifier.
[3]
The device general status can be as follows:
«Initializing»
during network connection.
«Compromised»
when there is a channel error, or when the current
preset has been modified and the
has been selected.
«Fault»
indicates a device error in the amplifier.
«OK»
indicates normal status.
[4]
Power switch. Will turn green to indicate that the
unit is switched on, or red to indicate Standby
mode.
[5]
Device name.
[6]
Triggers the
«Wink»
to physically identify an amplifier (flashing display
and buzzer).
Input monitoring
[1]
Enable/disable Input monitoring for each analog
input.
[2]
Enable/disable Input monitoring for each digital
input.
[3]
Individual Input monitoring error indicators.
[4]
Reset Input monitoring (IM) errors.
[5]
Fallback mode (Off, Manual or Auto).
[6]
Enable/disable Fallback.
[7]
Override mode (Off, Manual or Auto).
[8]
Enable/disable Override.
Input gain
[1]
General Input gain enable/disable switch.
[2]
Input gain controls for individual analog and digital
inputs.
3
when the amplifier is Standby,
«Strict»
mode
command, which allows you
Input routing
The
«Input routing» tab varies, depending on the
corresponding amplifier connected and accessed.
For detailed information on the input routing of the
respective amplifier, please refer to the corresponding
amplifier manual which can be downloaded from the
related product page at www.dbaudio.com.
Channel
Channel controls with Metering disabled (left)
and enabled (right).
[1]
Channel name.
[2]
Channel status.
[3]
LED indicators for ISP (green), GR (yellow), and
OVL (red).
[4]
Output level meter (Headroom).
[5]
Output level control.
[6]
Enable/disable Load monitoring (LM).
[7]
Mute/unmute channel.
TI 316 1.7 en