Bluesound PULSE M Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Bluesound PULSE M. Bluesound PULSE M 4. Wireless streaming speaker
Anche per Bluesound PULSE M: Manuale di configurazione rapida (2 pagine)

Stampa la pagina

THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK

CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-

CREATE THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS

NOT FUNCTIONING AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS

OR CONCERNS CONTACT AN AUTHORISED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE

PROCEEDING!

Steps to Factory Reset:

Disconnect the PULSE M from electrical power.

Wait 30 seconds.

Reconnect the power.

Once the LED turns Red, press and hold the PLAY/PAUSE button. The LED will immediately turn Green and

then back to Red - continue to hold the button for 30 seconds.

After 30 seconds, the LED will begin to blink red – then release the button.

All customization to the PULSE M will be removed and restored to factory settings.

IMPORTANT Removing your finger from the PLAY/PAUSE button at any time before the LED begins flashing red will

cancel the factory reset and leave the PULSE M in Upgrade Mode. Just start the steps again to factory reset it.

You will know the factory reset is successful if the PULSE M returns to Hotspot mode (wireless connection - the LED

will turn solid green). If it is connected to your network through a wired Ethernet connection, it will simply connect as if

it was a new player (LED will turn solid blue).

"HiFi for a wireless generation", PULSE M and all other Bluesound product names and

taglines are trademarks or registered trademarks of Bluesound International, a division of

Lenbrook Industries Limited. All other logos and services are trademarks or service marks

of their respective owners.

WARNING!