Bluesound Pulse 2 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Bluesound Pulse 2. Bluesound Pulse 2 4. All-in-one wireless streaming music system
Anche per Bluesound Pulse 2: Manuale di configurazione rapida (9 pagine)

Stampa la pagina

LED/MUTE BUTTON : This button has multiple functions - an indicator of network connectivity and a

MUTE button. For a full listing of LED Blink Codes, please see #1 – Blink Codes. Press to temporarily mute

audio output. Press again to restore audio from mute mode. When MUTE mode is selected the LED indicator

will flash blue.

+, - (VOLUME) : Toggle either button to vary volume level. Volume level will not change if you press and hold either button.

(+) : Increase volume level

(-) : Decrease volume level

PREVIOUS TRACK/NEXT TRACK : These buttons can be used to go back to the previous track◄ ◄ or skip to the

next track ► ► in your current playlist.

LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional

connection since the PULSE 2 can be connected to the network through a Wi-Fi connection to your router.

To setup the PULSE 2 using the LAN Port a Wired Ethernet connection is required. Using the Ethernet

cable provided, connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router

and the other end to the PULSE 2's LAN port.

USB (TYPE A) : Connect a USB mass storage device or Bluetooth adaptor to the USB input. Typical USB mass

storage devices compatible with the PULSE 2 include portable flash memory devices and external hard

drives (FAT32 formatted).

OPTICAL IN/ANALOG IN : Using a 3.5mm Stereo Audio Cable (not provided), connect one end to the Analog In

of the PULSE 2 and the other end to the corresponding analog output of other compatible devices. The source

will show as an Analog Input in the Navigation Drawer of the Bluesound app. Using an Optical to 3.5mm convertor

(included with the PULSE 2), a digital optical source can also be added. This will appear as Optical Input in the

Navigation Drawer.

SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player.

This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and

SERVICE control button.

HEADPHONE JACK : A 3.5mm headphone jack is located on the back of the PULSE 2.

AC MAINS INPUT : The PULSE 2 comes supplied with two separate AC power cords. Select the AC power

cord appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other end of

the AC power cord to PULSE 2's AC Mains input socket. Never force the plug into a wall outlet. An adaptor

may be necessary in certain regions. Always disconnect the plug from the wall outlet first, before disconnecting

the cable from the PULSE 2's AC Mains input socket.